Christmas Gift Box with Bow – 3D Printable, Plug-In Bow

A 60 mm Christmas gift box you can open and put a real gift inside: a ring, earrings, sweets or a gift card. The cover photo shows a real print in red and gold PLA. What's in the ZIP (4 parts): - gift_box_body.stl: the box, 60 × 60 × 41.5 mm, 1.6 mm walls, with raised ribbon bands on the sides - gift_box_lid.stl: the lid with matching ribbon bands. It has 0.25 mm clearance per side, so it lifts off easily. - gift_box_ribbon_cross.stl: a flat ribbon cross that goes on top of the lid - gift_box_bow.stl: a detailed 3D bow with a diamond-shaped peg underneath Assembly: the bow's peg goes through the ribbon cross and into the hole in the lid. It holds the cross in place and the bow can't spin. Add a drop of glue if you want it permanent. Print the box and lid in one colour and the cross and bow in another (red + gold, green + silver, white + red). How to print: - Box: open side up, no supports. - Lid: top face down on the bed, no supports. - Ribbon cross: flat, no supports. - Bow: the STL is already oriented to stand on its loop rims, so the loops print as vertical tubes. The slicer finds no floating areas. For the cleanest result, turn on tree supports set to "touching build plate only" and add a brim, because the bow touches the bed with a small area. Suggested settings: 0.16–0.2 mm layers, 3 perimeters, 15% infill. All parts are manifold and watertight. Personal use licence.